All the tweets pertaining to the design and operation of the vessel. You can click the link below to reverse the order of the reports and start from the very beginning. Clicking on the bookmark icon will save your spot so you can return at any time to pick up where you left off.
Kerbal Space Agency
@KSA_MissionCtrl
we've finally sent a kerbal up into space. Here is a timeline overview of the rockets that it took to get us to this point. The next big step is to reach orbit, altho whether that will be with a probe or a capsule still has not yet been decided. Full res: flickr.com/gp/kerbal_spacβ¦
Kerbal Space Agency
@KSA_MissionCtrl
yesterday was our 28th rocket launch in 500 days of operation. Here's a look back at the cadence for the Progeny rockets. We expect the next 100 days to be somewhere in between the last 200
Kerbal Space Agency
@KSA_MissionCtrl
#ICYMI we also went back earlier this week & picked out our top 25 photos from 2016 out of the 293 that were taken that year. Our top pick is attached, you can see them all here: flickr.com/photos/kerbal_β¦
Kerbal Space Agency
@KSA_MissionCtrl
we posted 900+ photos this year & after much debate the top 100 have been chosen! Some are simply our favorites but many are key events that happened this past year. Do you remember a favorite of yours that didn't make the cut? Our #1 photo is attached flickr.com/photos/kerbal_β¦
Kerbal Space Agency
@KSA_MissionCtrl
2017 Year in Review: Rocket Flight. We had some great missions this past year, you can review them all via the bit.ly/ProgenitorProg⦠home page and we can't wait to get started with bit.ly/AscensionProgr⦠next year!
Kerbal Space Agency
@KSA_MissionCtrl
the final analysis on the Progeny Mk3 dominates the report for this short operational week. Good weekend, all! bit.ly/OpsSummary5-1-β¦
Kerbal Space Agency
@KSA_MissionCtrl
expect a full analysis later today with the weekly operations report but for now here's a look at all 4 Progeny Mk3 launch trajectories
Kerbal Space Agency
@KSA_MissionCtrl
today Genesis & KerBalloon are prepping for their joint mission on Monday while Progenitor finishes review of Mk3 launch data from last week
Kerbal Space Agency
@KSA_MissionCtrl
Mortimer has posted our April bit.ly/FinanceReport_β¦ and it's nice to see a full spread of green numbers again! Revenue growth is projected
Kerbal Space Agency
@KSA_MissionCtrl
the bounty from both milestones has pushed the bit.ly/ProgenitorProg⦠back into the green says Mortimer, as he works on Apr report
Kerbal Space Agency
@KSA_MissionCtrl
Sounding Rocket Project has set the next milestone at 40km, we blew through both their 10 & 20km milestones last launch. Challenge accepted!
Kerbal Space Agency
@KSA_MissionCtrl
party on everyone! For those not able to attend, here is our weekly recap. Everyone enjoy their time off! bit.ly/OpsSummary4-24β¦
Kerbal Space Agency
@KSA_MissionCtrl
Drew gave a short speech congratulating everyone & announcing KSA regular ops suspended for 3 days next week for a well-deserved holiday
Kerbal Space Agency
@KSA_MissionCtrl
post-launch tasks are complete and now everyone at KSC is gathering in the VAB with food, drink & music to celebrate today's achievement
Kerbal Space Agency
@KSA_MissionCtrl
launch video is up! 3rd stage fins did shred, but did so a few secs later to ensure it was well clear of the payload youtube.com/watch?v=Tk-Szrβ¦
Kerbal Space Agency
@KSA_MissionCtrl
this telemetry data has not yet been analyzed but we wanted to make it available as soon as possible: bit.ly/ProgenyMk3-4_Tβ¦
Kerbal Space Agency
@KSA_MissionCtrl
MSV Lymun is away, w/ many thx from us for a safe return of the payload. Here's what the launch looked like from their station 4km offshore
Kerbal Space Agency
@KSA_MissionCtrl
the 3rd stage booster was tracked to an estimated distance of 4km, well within our 6km downrange cone that makes up the eastern safety range
Kerbal Space Agency
@KSA_MissionCtrl
post-launch reports continuing to trickle in as recovery ops continue. Stage 1 booster fell a bit further than last time, 1.2km from the pad
Kerbal Space Agency
@KSA_MissionCtrl
WE MADE IT 1/3 OF THE WAY TO SPACE!! It may not seem like much, but consider: that first 1/3 is a *lot* of the thickest atmosphere behind us
Kerbal Space Agency
@KSA_MissionCtrl
a final round of cheers, hugs, high-fours & fist pumps is going around Launch Ctrl as Tracking Station confirms final apokee: 22.772km!!!
Kerbal Space Agency
@KSA_MissionCtrl
recovery crew has the payload! Chute fully deployed @ +5:01 & landed by recovery ship @ +6:09, 9.2km downrange. Is now heading back to shore
Kerbal Space Agency
@KSA_MissionCtrl
good chute reported by Lymun!
Chute deployed +3:10
Payload currently descending @ 45m/s & slowing as air thickens
Full deployment is @ 600m
Chute deployed +3:10
Payload currently descending @ 45m/s & slowing as air thickens
Full deployment is @ 600m
Kerbal Space Agency
@KSA_MissionCtrl
we have nominal ascent!
3rd stage ignition +1:08
3rd stage decoupled +1:11
Fairings jettisoned +1:48 (apokee)
Awaiting chute predeploy @ 6km
3rd stage ignition +1:08
3rd stage decoupled +1:11
Fairings jettisoned +1:48 (apokee)
Awaiting chute predeploy @ 6km
Kerbal Space Agency
@KSA_MissionCtrl
Good launch!!
1st stage decoupled +0:06
2nd stage ignition +0:22
2nd stage decoupled +0:26
3rd stage near end of coast phase, pitch @ Ξ1.3Β°
1st stage decoupled +0:06
2nd stage ignition +0:22
2nd stage decoupled +0:26
3rd stage near end of coast phase, pitch @ Ξ1.3Β°
Kerbal Space Agency
@KSA_MissionCtrl
One minute to launch! Ascent will happen within ~1-2min, so be sure to watch bit.ly/ProgenyMk3_4 for real-time updates during this time
Kerbal Space Agency
@KSA_MissionCtrl
L-0:02:00 = rocket is now on internal power. Close monitoring of all systems these next 2 minutes, at L-30s one last primary poll. Stand by!
Kerbal Space Agency
@KSA_MissionCtrl
a small batch of low-level clouds are moving past but Wx has determined they will not hinder tracking cams, no hold called, winds still OK
Kerbal Space Agency
@KSA_MissionCtrl
L-0:05:00 = Final checks: Wx GO, Range GO, Flight GO, Tracking Station GO, Lymun GO. Ops Dir Drew has authorized launch clearance GO PROGENY
Kerbal Space Agency
@KSA_MissionCtrl
L-0:15:00 = rocket is ARMED & range safety protocol in effect, 300m pad radius, 6km downrange cone, 25km ceiling. Lymun reports waters clear
Kerbal Space Agency
@KSA_MissionCtrl
L-0:20:00 = Lymun has deployed its recovery vessel off the stern ramp & yea, it's beautiful out right now, 72Β°F with winds perfectly calm
Kerbal Space Agency
@KSA_MissionCtrl
L-0:30:00 = Wx reports some high-level cirrus but otherwise clear skies with winds calm. We are GREEN and GO for continuing the countdown!
Kerbal Space Agency
@KSA_MissionCtrl
L-0:45:00 = final launch rehearsal is underway in Launch Control, no issues popped up during pre-flight, nominal is the word of the day
Kerbal Space Agency
@KSA_MissionCtrl
L-1:24:00 = we have been hailed by the MSV Lymun as they approach their monitoring/recovery station. Maybe they'll *finally* get a payload today π
Kerbal Space Agency
@KSA_MissionCtrl
L-2:00:00 = pad workers are clearing out as flight controllers move into system checks for booster ignition, ensuring continuity to ignitors
Kerbal Space Agency
@KSA_MissionCtrl
a decent crowd is outside in the viewing areas but as many as possible are crammed into Launch Ctrl to be together if we make it all the way
Kerbal Space Agency
@KSA_MissionCtrl
L-2:28:00 = we have the all-clear from the launchpad and flight controllers have begun to wake up the rocket & check all systems & comms
Kerbal Space Agency
@KSA_MissionCtrl
today's launch profile will be almost identical to the last launch, only difference being we will stage at Ξ2Β° of pitch-over instead of Ξ3Β°
Kerbal Space Agency
@KSA_MissionCtrl
Flight Director Lanalye is assembling her team in Launch Control for pre-flight briefing, then we will roll right into the final countdown
Kerbal Space Agency
@KSA_MissionCtrl
pad crew is giving the rocket a check-over to see how it fared since yesterday. We are expecting weather to remain this perfect all day!
Kerbal Space Agency
@KSA_MissionCtrl
π
Sunrise/Sunsetπ
@ KSC (UTC-4)
4/28
#2π08:15:37 π 10:56:00 !!π!!
#3π14:16:28 π 16:56:51
#4π20:17:19 π 22:57:42
4/29
#1π02:18:10 π 04:58:33
@ KSC (UTC-4)
4/28
#2π08:15:37 π 10:56:00 !!π!!
#3π14:16:28 π 16:56:51
#4π20:17:19 π 22:57:42
4/29
#1π02:18:10 π 04:58:33
Kerbal Space Agency
@KSA_MissionCtrl
with the rocket on the pad Mortimer & Drew have closed out launch readiness with approval on all reviews. We are πGO FOR LAUNCHπ tomorrow!
Kerbal Space Agency
@KSA_MissionCtrl
rocket has been mounted ahead of the rain that we expected earlier today. Will monitor overnight - should not pose an issue, in theory
Kerbal Space Agency
@KSA_MissionCtrl
VAB reports the rocket is ready to go and triple-checked the control unit for the det-cord. Prepping now to roll out & mount @ 3rd sunrise
Kerbal Space Agency
@KSA_MissionCtrl
Mortimer says that up until today, Apr was looking like our 3rd straight month in the red for net profit & now we're well in the green again
Kerbal Space Agency
@KSA_MissionCtrl
Tracking Station reports ready to receive telemetry data during tomorrow's launch. Tracking cameras on roof have also been calibrated
Kerbal Space Agency
@KSA_MissionCtrl
launch readiness checks are underway today in the VAB, Tracking Station, Launch Control and Admin buildings for bit.ly/ProgenyMk3_4
Kerbal Space Agency
@KSA_MissionCtrl
VAB is ready for final launch-readiness checks tomorrow on the 4th Mk3 prior to bringing it out to the pad so we can launch early on Friday
Kerbal Space Agency
@KSA_MissionCtrl
Simon reports bit.ly/ProgenyMk3_4 is ready for its final closeout ops tomorrow & you can learn more about the rocket on its vessel page
Kerbal Space Agency
@KSA_MissionCtrl
VAB has accepted delivery of the Mk3 payload, which will be carrying a meteorological survey package and aeronomy sensor array this flight
Kerbal Space Agency
@KSA_MissionCtrl
our day is still far from over but you can catch up on everything else from this past week in our ops summary - click the img below!
Kerbal Space Agency
@KSA_MissionCtrl
we are aiming for a 4th & hopefully final launch of the Progeny Mk3 on 4/28 @ 15:30 UTC. Mk1-B boosters arriving on Friday, VAB is ready
Kerbal Space Agency
@KSA_MissionCtrl
cause of the fin shredding anomaly has been uncovered. Minor flaw, easy fix. Meeting set for tomorrow to choose next launch time for Mk3
Kerbal Space Agency
@KSA_MissionCtrl
Still no word from the Progenitor team on the booster analysis. Integration continues for the Mk1 booster stacks in prep for 4th Mk3 flight
Kerbal Space Agency
@KSA_MissionCtrl
here is the ops review for this past week. Of note is our initial Mk3 analysis. Everyone have a relaxing weekend bit.ly/OpsSummary4-10β¦
Kerbal Space Agency
@KSA_MissionCtrl
so ends another day of operations here @ KSC but this one was special: today we've orbited Kerbol twice since the start of the KSA. Kerzzah!
Kerbal Space Agency
@KSA_MissionCtrl
the Mk1-A booster has been delivered to the VAB & now they have all they can to try & figure out where things went wrong for the last launch
Kerbal Space Agency
@KSA_MissionCtrl
in addition to ordering the parts to build our first Deuce in May, we've ordered 3 Mk1-B boosters for at least 1 more MK3 launch end of Apr
Kerbal Space Agency
@KSA_MissionCtrl
telemetry data for the Progeny Mk3 flight this wk is now available for review online if anyone wants to take a look: bit.ly/ProgenyMk3-3_Tβ¦
Kerbal Space Agency
@KSA_MissionCtrl
the Mk1-A booster has been located in 617m of water, rolled down a large slope after hitting the seabed. Is now being raised to the surface
Kerbal Space Agency
@KSA_MissionCtrl
underwater search operations are back underway for the Mk1-A booster while VAB continues to closely inspect what remains of the Mk3 booster
Kerbal Space Agency
@KSA_MissionCtrl
so far, no luck finding the Mk1-A booster on the sea floor. Search will continue tomorrow, still has about 20% of original area to cover
Kerbal Space Agency
@KSA_MissionCtrl
the booster is too small to show up on sonar because ocean floor here is very rocky. Underwater cameras will be used w/ a std search pattern
Kerbal Space Agency
@KSA_MissionCtrl
the dredging ship has arrived & will begin searching for the Mk1-A booster. We have approx location, could be anywhere from 500-700m deep
Kerbal Space Agency
@KSA_MissionCtrl
Progenitor engineers are ready to start looking over the Mk3 lower booster to see if they can find any clues to what went wrong yesterday
Kerbal Space Agency
@KSA_MissionCtrl
pretty much everyone called it an early day since ops started before 9am. Lots still to learn from this launch! Here's a liftoff photo
Kerbal Space Agency
@KSA_MissionCtrl
post launch & recovery ops have concluded. We have the 1st stage booster to examine but calling in a dredger to fish out the 2nd stage tmrw
Kerbal Space Agency
@KSA_MissionCtrl
all flight recordings & data still under review & will be for rest of the week but here's where things went wrong youtube.com/watch?v=sUT7v8β¦
Kerbal Space Agency
@KSA_MissionCtrl
post-launch & recovery operations are ongoing, but more unfortunate news is that besides not reaching upper atmo we even missed our 10km goal, apokee was ~9.5km. So close!!
Kerbal Space Agency
@KSA_MissionCtrl
just 335m short of the water (1.4km from the launchpad) the payload has landed safely & is being recovered by our UTV teams. Sry Tongjess π¬
Kerbal Space Agency
@KSA_MissionCtrl
payload is descending through 2.5km & recovery craft reports they are up on the beach, so its coming down just short of the water it seems
Kerbal Space Agency
@KSA_MissionCtrl
tracking cameras confirm both the 2nd & 3rd stage boosters have splashed down in the waters east of the launchpad. (Tongjess slightly south)
Kerbal Space Agency
@KSA_MissionCtrl
of course, obviously we did not intend to destabilize the rocket by taking out the 2nd stage fins at the same time, but still some good news
Kerbal Space Agency
@KSA_MissionCtrl
UTVs on patrol have reported the XL booster is only 804m almost directly due east of the launch pad. Taking out the fins worked as intended!
Kerbal Space Agency
@KSA_MissionCtrl
we have good chute deploy & descent of the payload. It looks like it will splashdown just offshore. Flight team already in anomaly review
Kerbal Space Agency
@KSA_MissionCtrl
inflight anomaly occurred at T+5s when XL booster decoupled & both its fins and fins on 2nd stage were shredded. Payload now coasting to Ap
Kerbal Space Agency
@KSA_MissionCtrl
good ignition of XL booster & launch of Progeny Mk3! First stage will have expired by about the time you finish reading this tweet
Kerbal Space Agency
@KSA_MissionCtrl
L-1min! Final go/no go of primary stations at L-30s and assuming no "hold hold hold!" vehicle will launch on schedule. π Go Progeny! π
Kerbal Space Agency
@KSA_MissionCtrl
internal battery power is now maintaining the rocket systems as ground umbilicals are pulled from the vehicle. RF comms coming back 5x5
Kerbal Space Agency
@KSA_MissionCtrl
Final checks complete: Wx is GO, Range is GO, Flight is GO, Tracking Station is GO, Tongjess is GO. Drew gives his nod. We are GO FOR LAUNCH
Kerbal Space Agency
@KSA_MissionCtrl
Jeb just got kicked out of the building for standing near the flight ops desk, maintains he "wasn't going to do anything but watch closely"
Kerbal Space Agency
@KSA_MissionCtrl
we have no reports of range violations, rocket now ARMED & range is closed. 300m blast radius around pad, 6km downrange cone w/25km ceiling
Kerbal Space Agency
@KSA_MissionCtrl
MSV Tongjess has dispatched its recovery craft off the stern water ramp & we can now see better that weather is indeed GREEN for launch
Kerbal Space Agency
@KSA_MissionCtrl
we have no rain outside tho Wx kerbs say sky conditions may be an issue, it's still dark so can't get a good idea of clouds. Count continues
Kerbal Space Agency
@KSA_MissionCtrl
L-0h45m = launch control team now beginning flight rehearsal after completing checks of rocket & announcing all systems nominal, no issues!
Kerbal Space Agency
@KSA_MissionCtrl
thinner crowds than usual gathering outside, mainly staff only as most families couldn't adjust sched in time after scrub, plus early in day
Kerbal Space Agency
@KSA_MissionCtrl
MSV Tongjess remained at anchor offshore so is already on station & reports ready to assist w/range monitoring & payload recovery operations
Kerbal Space Agency
@KSA_MissionCtrl
astronauts are here in Launch Control to observe. Tried to ask again to push the launch button but Lanalye once more denied their request
Kerbal Space Agency
@KSA_MissionCtrl
all rocket systems responsive via ground & RF comms, preflight now moving to detailed checks of all systems & components aboard the vehicle
Kerbal Space Agency
@KSA_MissionCtrl
we are starting the countdown from L-2h30m. No issues w/rocket yesterday so removing hold period & going straight into final count/launch
Kerbal Space Agency
@KSA_MissionCtrl
intial weather report has been delivered & looks good. Drew has given the GO to proceed with setting up for starting the countdown @ 12:00Z
Kerbal Space Agency
@KSA_MissionCtrl
launch control team has arrived for Flight Director Lanalye to review launch procedures based on the same brief they got yesterday
Kerbal Space Agency
@KSA_MissionCtrl
taken earlier when pad crews went out to check on the rocket after its lengthy stay on the pad. They report everything still looks good
Kerbal Space Agency
@KSA_MissionCtrl
π
Sunrise/Sunsetπ
@ KSC (UTC-4)
4/12
#2π07:21:13 π 10:01:36 !!π!!
#3π13:22:04 π 16:02:27
#4π19:22:55 π 22:03:18
4/13
#1π01:23:46 π 04:04:09
@ KSC (UTC-4)
4/12
#2π07:21:13 π 10:01:36 !!π!!
#3π13:22:04 π 16:02:27
#4π19:22:55 π 22:03:18
4/13
#1π01:23:46 π 04:04:09
Kerbal Space Agency
@KSA_MissionCtrl
Simon reports check of the rocket shows no sign of stress damage to clamps or launch rail. Continuing with our plan to launch early tomorrow
Kerbal Space Agency
@KSA_MissionCtrl
we've completed post-scrub activities, will monitor rocket for a while longer to ensure mount will hold for this extended attachment period
Kerbal Space Agency
@KSA_MissionCtrl
launch time has been reset to 14:30 UTC tomorrow, we'll be leaving the rocket on the pad so we can get an early start. Hopefully Wx improves
Kerbal Space Agency
@KSA_MissionCtrl
scrubbing for the day :/ we've run out of time to complete countdown & launch with enough daylight remaining for good tracking & recovery
Kerbal Space Agency
@KSA_MissionCtrl
we are now holding the countdown at L-30min due to weather, still lacking the clearer skies needed for proper video monitoring of the ascent
Kerbal Space Agency
@KSA_MissionCtrl
pre-flight complete, final launch rehearsal beginning. We're still progressing at a condensed pace, not waiting for L-time if running early
Kerbal Space Agency
@KSA_MissionCtrl
weather remains RED for clouds. We can still see clear skies to the west but it seems low pressure system has died & front is stalled
Kerbal Space Agency
@KSA_MissionCtrl
we have good comms both ground and RF to the rocket, all systems nominal. Pad crew clearing out now to 300m blast safety range
Kerbal Space Agency
@KSA_MissionCtrl
rocket mounting completed slightly ahead of schedule & preflight is next, starting w/ensuring rocket is hooked up & responding nominally
Kerbal Space Agency
@KSA_MissionCtrl
mounting operations going well. We've re-opened the staff & family outdoor viewing areas for this launch, setup the same way as launch #1
Kerbal Space Agency
@KSA_MissionCtrl
launch control team was briefed on schedule earlier today so Flight Director Lanalye has them running drills while the rocket is mounted
Kerbal Space Agency
@KSA_MissionCtrl
we saw sunset on the Western Mtns, still overcast here. Rain has stopped. Launch prep will begin, we'll hope skies clear. L-0 = 21:30 UTC
Kerbal Space Agency
@KSA_MissionCtrl
winds calming, MSV Tongjess has arrived & reports sea conditions are rough but within limits set for water recovery. Is on station offshore
Kerbal Space Agency
@KSA_MissionCtrl
rain, rain - go away; We really want to launch today π We can start launch prep as late as 18:34 UTC. After that, have to scrub for the day
Kerbal Space Agency
@KSA_MissionCtrl
rainfall has started, but that's not the main reason for launch delay - low & overcast clouds are violating our weather rules for launch
Kerbal Space Agency
@KSA_MissionCtrl
rocket rollout is on hold. We have reports of clear skies following the mass of precipitation but not sure how long it will take to pass
Kerbal Space Agency
@KSA_MissionCtrl
Wx report is storms coming from the west. Normally stopped by mtns, just minor flooding, but low pressure off the coast is drawing them over
Kerbal Space Agency
@KSA_MissionCtrl
we have begun the process of gathering Wx reports from various sources around the region. L-6hr final launch countdown set for 14:20 UTC
Kerbal Space Agency
@KSA_MissionCtrl
π
Sunrise/Sunsetπ
@ KSC (UTC-4)
4/11
#2π07:17:49 π 09:58:12
#3π13:18:40 π 15:59:03 !!π!!
#4π19:19:31 π 21:59:54
4/12
#1π01:20:22 π 04:00:45
@ KSC (UTC-4)
4/11
#2π07:17:49 π 09:58:12
#3π13:18:40 π 15:59:03 !!π!!
#4π19:19:31 π 21:59:54
4/12
#1π01:20:22 π 04:00:45
Kerbal Space Agency
@KSA_MissionCtrl
everything is in place for bit.ly/ProgenyMk3_3 launch operations to begin tomorrow starting at 14:20 UTC. Upper atmosphere here we come?
Kerbal Space Agency
@KSA_MissionCtrl
Drew & Mortimer have received all the readiness reports & signed off on all the paperwork & once again we are πGO FOR LAUNCHπ tomorrow!
Kerbal Space Agency
@KSA_MissionCtrl
bit.ly/ProgenyMk3_3 is on the lorry & being marshaled into position to roll out tomorrow. Simon reports rocket is looking good
Kerbal Space Agency
@KSA_MissionCtrl
Tracking Station had some technical issues these past few days that were finally resolved. The break room microwave has been replaced
Kerbal Space Agency
@KSA_MissionCtrl
FD Lanalye says her team is ready for tomorrow, spent last week working out all kinds of scenarios where fin shredding could cause problems
Kerbal Space Agency
@KSA_MissionCtrl
the now-familiar routine of launch readiness checks has begun - especially familiar since it's an exact repeat of what we had to do last wk
Kerbal Space Agency
@KSA_MissionCtrl
final closeout work on the Mk3 is ongoing now in the VAB, Simon reports it will be all ready for launch readiness checks next Monday
Kerbal Space Agency
@KSA_MissionCtrl
we've allowed a KNN crew access to the VAB so they can document the final process of rocket assembly leading up to launch. Report airs Sun!
Kerbal Space Agency
@KSA_MissionCtrl
after the MSV Tongjess assists us with the (hopefully) recovery of the Mk3 payload next wk it will sail out for a low-alt KerBalloon mission
Kerbal Space Agency
@KSA_MissionCtrl
VAB is closing out ops for the day after rigging all the Progeny Mk3 fins with det-cord. They will be re-mounted back on the rocket tomorrow
Kerbal Space Agency
@KSA_MissionCtrl
fins will be unmounted & low-yield det-cord will be inserted into drilled holes. Fins will be then be shredded upon stage separation
Kerbal Space Agency
@KSA_MissionCtrl
new launch time for bit.ly/ProgenyMk3_3 set at 20:20 UTC on 4/11 to give engineers time to implement some changes to the rocket
Kerbal Space Agency
@KSA_MissionCtrl
second sunrise from the KSC causeway. Most staffers already here, especially Progenitor teams to continue debate on rocket debris mitigation
Kerbal Space Agency
@KSA_MissionCtrl
program leads and select staff have laid out options for better debris control but deliberations will remain ongoing into tomorrow at least
Kerbal Space Agency
@KSA_MissionCtrl
rocket unmounting completed and given that Jeb didn't crash on the way out he's been allowed to drive the rocket back to the VAB as well
Kerbal Space Agency
@KSA_MissionCtrl
we have a brief press release online to explain further why this has caused us to cancel the launch today bit.ly/ProgenitorPR10
Kerbal Space Agency
@KSA_MissionCtrl
launch has been scrubbed! Drew got word earlier that some kerbs taking a stroll along the beach found Mk3 Stage 2 debris 6km south of KSC
Kerbal Space Agency
@KSA_MissionCtrl
L-4:15 = bit.ly/ProgenyMk3_3 mounting completed, launch team are now bringing systems online & ensuring all connections are nominal
Kerbal Space Agency
@KSA_MissionCtrl
today's launch should reach the upper atmosphere if all goes well. Booster ignition will occur after nose drops >3Β° during coast period
Kerbal Space Agency
@KSA_MissionCtrl
kerbs are seen heading towards the launch control building, where the launch team will assemble for their preflight briefing from FD Lanalye
Kerbal Space Agency
@KSA_MissionCtrl
rocket is leaving the VAB for the launch pad and it looks like Jeb managed to convince *someone* that he should be the one to drive it??
Kerbal Space Agency
@KSA_MissionCtrl
L-5:58 = collective weather forecast has been compiled and we are currently GREEN with a 30% chance of heavy cloud cover later in the day
Kerbal Space Agency
@KSA_MissionCtrl
KSC coming alive with the hustle & bustle of launch day! Stay tuned for updates at these milestones as we work through the launch schedule
Kerbal Space Agency
@KSA_MissionCtrl
π
Sunrise/Sunsetπ
@ KSC (UTC-4)
4/4
#2π 09:34:24
#3π12:54:52 π 15:35:15 !!π!!
#4π18:55:43 π 21:36:06
4/5
#1π00:56:34 π 03:36:57
#2π06:57:25
@ KSC (UTC-4)
4/4
#2π 09:34:24
#3π12:54:52 π 15:35:15 !!π!!
#4π18:55:43 π 21:36:06
4/5
#1π00:56:34 π 03:36:57
#2π06:57:25
Kerbal Space Agency
@KSA_MissionCtrl
#ICYMI bit.ly/ProgenyMk3_3 is all set for launch tomorrow 20:00 UTC, countdown now stands at L-19h12m. Launch ops start tmrw @ 14:00 UTC
Kerbal Space Agency
@KSA_MissionCtrl
we are πGO FOR LAUNCHπ!! Ops Director Drew has given the green light after all launch readiness checks were completed today. L-22h39m!!
Kerbal Space Agency
@KSA_MissionCtrl
VAB has concluded integration testing, bit.ly/ProgenyMk3_3 is loaded up on the lorry and ready to roll out tomorrow. Almost there...
Kerbal Space Agency
@KSA_MissionCtrl
Flight Director Lanalye says all launch control personnel & equipment are checked out and ready, as is the Tracking Station. Good so far!
Kerbal Space Agency
@KSA_MissionCtrl
Simon reports that the launch base is checked out & configured for mounting, ready to send off another rocket into the wild blue yonder
Kerbal Space Agency
@KSA_MissionCtrl
now that he's completed bit.ly/FinanceReport_β¦ Mortimer can focus on making sure the Progenitor account is all balanced for launch
Kerbal Space Agency
@KSA_MissionCtrl
launch readiness checks for bit.ly/ProgenyMk3_3 have commenced & we'll be spending all day making sure everything is ready for tomorrow
Kerbal Space Agency
@KSA_MissionCtrl
time for another retrospective look at KSA milestones as Duna completes its first orbit around Kerbol since our space program began last yr
Kerbal Space Agency
@KSA_MissionCtrl
Simon reports the final Progeny Mk3 is ready for launch readiness checks next week. Here's your weekly recap - bit.ly/OpsSummary3-27β¦
Kerbal Space Agency
@KSA_MissionCtrl
the launch base, which finished adjustments yesterday, is already loaded up and will be trucked out to the launch pad later this afternoon
Kerbal Space Agency
@KSA_MissionCtrl
fin adjustments & payload integration completed, the rocket is being stacked for final integration checks that will take the rest of the day
Kerbal Space Agency
@KSA_MissionCtrl
today is the start of our 200th day of operations since launching our program back in Sept 2016! The next 200 look to be just as awesome
Kerbal Space Agency
@KSA_MissionCtrl
we forgot to note the greater pitch on launch #2 didn't destroy the upper launch rail. Will have to see if this remains the case w/new pitch
Kerbal Space Agency
@KSA_MissionCtrl
VAB winding down for the day, launch base re-pitched to 5Β° & rockets are now ready for fin adjustments tomorrow before final integration
Kerbal Space Agency
@KSA_MissionCtrl
we're getting better cabling installed with a semi-conductive sheath to hopefully prevent tunneling animals from chewing through it again
Kerbal Space Agency
@KSA_MissionCtrl
late start to the day at KSC after power was restored from an outage; our main power conduit from Umbarg was cut. Fried animal found, dead
Kerbal Space Agency
@KSA_MissionCtrl
new launch time is 4/4 @ 20:00 UTC, rocket fins will be adjusted and also launch base pitch will be raised a degree to match Mk2 base of 5Β°
Kerbal Space Agency
@KSA_MissionCtrl
a lot of deliberation these past few hours by the Progenitor team, Drew & Simon have agreed to make more changes to the rocket configuration
Kerbal Space Agency
@KSA_MissionCtrl
Progeny Mk3 flight analysis wrapped up yesterday & now the Progenitor team is meeting to decide how to proceed with the final planned launch
Kerbal Space Agency
@KSA_MissionCtrl
unfortunately we did fall short of 10km by less than 1km but no big deal as the 3rd launch will definitely break thru & also hit upper atmo
Kerbal Space Agency
@KSA_MissionCtrl
we've yet to fully review all launch footage but have a video for you all to better see what happened yesterday youtube.com/watch?v=1OoBdlβ¦
Kerbal Space Agency
@KSA_MissionCtrl
oh right, it's the end of the week. We've been so busy it sort of skipped our minds. Everyone relax this weekend! bit.ly/OpsSummary3-20β¦
Kerbal Space Agency
@KSA_MissionCtrl
sure, today's launch ended in disappointment but we expect there's still much to learn from it. Great setup for the launch photo Bob!
Kerbal Space Agency
@KSA_MissionCtrl
we'll be backing out of launch & cleaning up for the rest of the day, will fully review telemetry data gathered by Tracking Station next wk
Kerbal Space Agency
@KSA_MissionCtrl
we do not have a splashdown location for the 2nd stage booster but it was well over the water upon decoupling. 3rd stage & payload detonated
Kerbal Space Agency
@KSA_MissionCtrl
UTV teams out on patrol along the beach report that the 1st stage booster fell just meters short of the water, 1.6km east of the launch pad
Kerbal Space Agency
@KSA_MissionCtrl
unfortunately during 3rd stage burn the rocket flew too far south out of the ascent corridor and the RSO was forced to detonate the booster
Kerbal Space Agency
@KSA_MissionCtrl
ignition & liftoff successful w/1st stage burnout/decouple @ L+4s, 2nd stage ignition @ L+41s, rocket tipping over much more than expected
Kerbal Space Agency
@KSA_MissionCtrl
EC levels are discharging at nominal rates, assuming no further issues or range incursion final primary poll at L-30s then liftoff! Standby!
Kerbal Space Agency
@KSA_MissionCtrl
rocket is now switching over from ground to battery power, all systems remain nominal, all launch stations remain green. L-2min & counting!
Kerbal Space Agency
@KSA_MissionCtrl
we're GO FOR LAUNCH! L-5min! bit.ly/ProgenyMk3_2 has real time staging updates. Total flight time expected to last for about 1-2 minutes
Kerbal Space Agency
@KSA_MissionCtrl
approaching the L-00:05 final general poll as the sun rises, showing skies to be mostly clear w/high-level clouds. Weather remains green
Kerbal Space Agency
@KSA_MissionCtrl
RSO & Tongjess confirm range is clear. Rocket is now ARMED & anything/anyone spotted within safety zone will put a hold on the countdown
Kerbal Space Agency
@KSA_MissionCtrl
Tongjess has launched its recovery boat off the stern ramp, which will zip under & pickup the payload as it descends towards the water
Kerbal Space Agency
@KSA_MissionCtrl
weather outside is hard to determine as it is still dark out, but there's no rain & air smells dry so we are proceeding w/ final countdown!
Kerbal Space Agency
@KSA_MissionCtrl
up on the roof of the VAB, our astronauts are ready to head back inside the moment they hear any emergency sirens signaling incoming debris
Kerbal Space Agency
@KSA_MissionCtrl
we're confident the new launch angle will send things out over water, but just to be sure this launch has no outdoor viewing locations setup
Kerbal Space Agency
@KSA_MissionCtrl
launch rehearsal has completed & we are now standing by @ L-02:27, will continue to monitor rocket & weather, picking up the count @ L-00:30
Kerbal Space Agency
@KSA_MissionCtrl
early arrival of Tongjess has allowed Launch Ctrl to step up their own timetable & have finished pre-flight, report 0 issues. Rehearsal time
Kerbal Space Agency
@KSA_MissionCtrl
MSV Tongjess has arrived early & is now maintaining station 3km offshore east of KSC, is setting up range profile on its radar w/ our RSO
Kerbal Space Agency
@KSA_MissionCtrl
excellent job pad crew! Launch ctrl reports rocket is in great condition & is rdy for pre-flight. Pad crew clearing out of 300m blast radius
Kerbal Space Agency
@KSA_MissionCtrl
rocket is mounted, no issues securing the lower booster using new clamps. Launch ctrl now checking everything hooked up right, no damage
Kerbal Space Agency
@KSA_MissionCtrl
we don't expect this launch to reach the upper atmosphere but we do expect it to break the 10km milestone set by the Kerbal Sounding Project
Kerbal Space Agency
@KSA_MissionCtrl
today's launch profile will be opposite of first launch, coasting until vertical speed falls to 0 before igniting the next booster stage
Kerbal Space Agency
@KSA_MissionCtrl
it's time for Lanalye & her team to assemble for their final launch briefing. Mounting operations going smooth out on the pad, Simon reports
Kerbal Space Agency
@KSA_MissionCtrl
Bob is setting up his camera atop the VAB, which is where the astronauts plan to hang out for this launch. Rocket is rolling out to the pad
Kerbal Space Agency
@KSA_MissionCtrl
we are currently green for weather, keeping an ear on some reports from airship captains of heavy clouds moving towards us from the north
Kerbal Space Agency
@KSA_MissionCtrl
Launch day! While we collect our advance weather report, have a review of today's planned launch timeline. Expect updates @ these milestones
Kerbal Space Agency
@KSA_MissionCtrl
π
Sunrise/Sunsetπ
@ KSC (UTC-4)
3/24
#2π 08:57:00
#3π12:17:28 π 14:57:51 !!π!!
#4π18:18:19 π 20:58:42
3/25
#1π00:19:10 π 02:59:33
#2π06:20:21
@ KSC (UTC-4)
3/24
#2π 08:57:00
#3π12:17:28 π 14:57:51 !!π!!
#4π18:18:19 π 20:58:42
3/25
#1π00:19:10 π 02:59:33
#2π06:20:21
Kerbal Space Agency
@KSA_MissionCtrl
Launch Readiness Review: Ctrl[β
] VAB[β
] Admin[β
]
Drew & Mortimer have signed off on all the forms. bit.ly/ProgenyMk3_2 launch is GO! π
Drew & Mortimer have signed off on all the forms. bit.ly/ProgenyMk3_2 launch is GO! π
Kerbal Space Agency
@KSA_MissionCtrl
Launch Readiness Review: Ctrl[β
] VAB[β
] Admin[]
while Jeb was in the air, Simon reported rocket checks have been completed with no issues
while Jeb was in the air, Simon reported rocket checks have been completed with no issues
Kerbal Space Agency
@KSA_MissionCtrl
Launch Readiness Review: Ctrl[β
] VAB[] Admin[] Flight Director Lanalye reports her launch team is rdy to conduct tomorrow's flight profile
Kerbal Space Agency
@KSA_MissionCtrl
Progeny Mk3 launch readiness reviews getting underway in the Admin, VAB & Launch Ctrl buildings. They will collectively take the entire day
Kerbal Space Agency
@KSA_MissionCtrl
the new fin angles we are going to try this launch: 1st stage 1Β°, 2nd stage 0.5Β° and 3rd stage 0.25Β° - less combined than original 1st stage
Kerbal Space Agency
@KSA_MissionCtrl
VAB pulled a little OT thx to some issues during integration testing but everything was sorted & Progeny Mk3 launch readiness checks tmrw!
Kerbal Space Agency
@KSA_MissionCtrl
the Progeny launch base is back out on the pad, tilted to 6Β° & rdy for the mounting of the 2nd Mk3 finishing up integration today in the VAB
Kerbal Space Agency
@KSA_MissionCtrl
excellent day of work in the VAB, reports Simon. Launch base is ready, fin reconfiguration ~75% done & science payload integration has begun
Kerbal Space Agency
@KSA_MissionCtrl
launch base repair/re-align is today in addition to starting to dismantle the fins off the next Progeny rocket to change their pitch as well
Kerbal Space Agency
@KSA_MissionCtrl
KSC mostly empty & quiet, no weekend personal projects as everyone likes to take some time well away from work after a stressful launch week
Kerbal Space Agency
@KSA_MissionCtrl
busy week, lots to review with lots of additional details included as well, so read up & have a great weekend! bit.ly/OpsSummary3-13β¦
Kerbal Space Agency
@KSA_MissionCtrl
the launch of bit.ly/ProgenyMk3_2 has officially been pushed back to 3/24 @ 19:20 UTC. See link for details (also Ops Summary l8er 2day)
Kerbal Space Agency
@KSA_MissionCtrl
so has anyone realized yet that our launch yesterday was 3 months to the day since the last Progeny Mk2.1 launch back in Dec? Not planned ππ
Kerbal Space Agency
@KSA_MissionCtrl
nasty weather has finally returned, working up from the south apparently, Umbarg has been getting poured on all day. We don't care anymore!
Kerbal Space Agency
@KSA_MissionCtrl
if you'd like to review the data yourself, including the TDU plot & tracking station data stream, check it out here: docs.google.com/spreadsheets/dβ¦
Kerbal Space Agency
@KSA_MissionCtrl
Progeny Mk3 flight data has been thoroughly examined, project leads & admin will be gathering tomorrow to discuss changes to Flights 2 & 3
Kerbal Space Agency
@KSA_MissionCtrl
we also added a record field for maximum dynamic pressure during ascent, which also goes to the Mk3 for 190.237kPa (Mk2.1 was 72.297kPa)
Kerbal Space Agency
@KSA_MissionCtrl
we officially have a new bit.ly/KSARecords for a vessel under acceleration: the Mk3 almost dbled the Mk2.1's 374.189m/s w/ 732.280m/s!
Kerbal Space Agency
@KSA_MissionCtrl
all the TDU information is still being reviewed by the Progenitor engineers but here is a plot, now w/ 0.25s per pixel. Mass drop = staging
Kerbal Space Agency
@KSA_MissionCtrl
the launch base will be moved back into the VAB after 3rd sunrise so its angle can be adjusted from 3Β° to 6Β° - we can't have debris landing like this
Kerbal Space Agency
@KSA_MissionCtrl
thankfully Simon has reported the launch base is not damaged except for the one rail that can easily be replaced, we ordered a bunch more
Kerbal Space Agency
@KSA_MissionCtrl
the new booster sounds so awesome, we just had to hook up the mic for this launch video footage. Hot staging action! youtube.com/watch?v=OWAzxPβ¦
Kerbal Space Agency
@KSA_MissionCtrl
over in the R&D labs they are currently extracting information from the Telemetry Data Unit so we can fully analyze yesterday's flight
Kerbal Space Agency
@KSA_MissionCtrl
today's post-launch review is kicking off with a closer inspection of the launch base, which was damaged during lift-off yesterday
Kerbal Space Agency
@KSA_MissionCtrl
.@BrainOfVulcan yea they were just thrill-seeking the initial liftoff. They ran outside right afterwards but right underneath, not much 2 c
Kerbal Space Agency
@KSA_MissionCtrl
well, that was a long day. Flight didn't go as planned, but was still great to launch a rocket again!! Here's a launch photo. More tomorrow!
Kerbal Space Agency
@KSA_MissionCtrl
MSV Lymun has set sail, we thank them for their participation even tho this was 2nd time they didn't actually have to recover anything π
Kerbal Space Agency
@KSA_MissionCtrl
launch cleanup/after-action items still ongoing, like digging 1st stage out of where it drilled itself into the ground by the launch pad rd
Kerbal Space Agency
@KSA_MissionCtrl
an unhappy Simon has already grumbled about the Mk3 flight 2 being pushed back to flight 3 launch date, at least. Will confirm by end of wk
Kerbal Space Agency
@KSA_MissionCtrl
crews have successfully recovered the payload just 356m north of the launch pad. Sorry Lymun crew! We really did mean to send it your way!
Kerbal Space Agency
@KSA_MissionCtrl
payload is approaching 3.5km & halfway down to the ground, rate of descent is nominal. We already have a UTV waiting underneath it
Kerbal Space Agency
@KSA_MissionCtrl
yikes, we have some debris landing towards the observation areas. Not good. UTVs have been dispatched to asses & recover. Everyone is safe
Kerbal Space Agency
@KSA_MissionCtrl
chute deploy was shortly after payload fairing sep to allow long descent for launch craft to get below. However payload descending over land
Kerbal Space Agency
@KSA_MissionCtrl
and just like that, it's over! Wow, that rocket spun up *really* fast. Sounded so awesome also. Chute has deployed & payload is descending
Kerbal Space Agency
@KSA_MissionCtrl
we have ignition of the XL booster w/131.6kN of thrust pushing the Mk3 off the pad at 8Gs. We are hot staging, flight time will be <1min
Kerbal Space Agency
@KSA_MissionCtrl
final polling soon @ L-30s! If no hold, then launch. Head to bit.ly/ProgenyMk3_1 for real-time inflight staging updates. πGo Progeny!π
Kerbal Space Agency
@KSA_MissionCtrl
rocket is switching over to internal power, EC levels being closely monitored to ensure batteries are supplying adequate power to systems
Kerbal Space Agency
@KSA_MissionCtrl
we have a GO from all stations in launch control to pickup the count at L-5min. Tracking station is GO, Lymun is GO, Range is Go, Wx is GO!!
Kerbal Space Agency
@KSA_MissionCtrl
we're seeing clearer skies coming from the west & are currently working to resume countdown at L-5min if Wx agrees that we're good to go
Kerbal Space Agency
@KSA_MissionCtrl
downrange corridor is monitored by radar aboard the MSV Lymun, whose officer works in conjunction w/ RSO in launch ctrl to ensure all clear
Kerbal Space Agency
@KSA_MissionCtrl
yup our crew is right where we expected them to be π using the hold time to grab & send us a photo, taken by Val. Be rdy to duck out there!
Kerbal Space Agency
@KSA_MissionCtrl
our daylight launch window is open until 21:02:43 UTC, 45 minutes prior to 3rd sunset. We need enough light for video footage & recovery ops
Kerbal Space Agency
@KSA_MissionCtrl
we have a hold from Weather due to heavy cloud cover moving through. No reports of rain from the west, so we will wait for skies to clear
Kerbal Space Agency
@KSA_MissionCtrl
RSO has closed the range - 300m radius around pad, 6km downrange cone with a 25km ceiling. *Anything* in this zone will stop the countdown
Kerbal Space Agency
@KSA_MissionCtrl
MSV Lymun reports their launch craft has been deployed off the stern ramp & is ready to get under the payload as it descends for recovery
Kerbal Space Agency
@KSA_MissionCtrl
weather check is negative for rain, but clouds appear to be gathering out west. Rain clouds? Launch proceeds until we hear word of rain
Kerbal Space Agency
@KSA_MissionCtrl
FD Lanalye reports a nice smooth rehearsal, even with a simulated surprise anomaly thrown in. We are ready to roll into the final countdown!
Kerbal Space Agency
@KSA_MissionCtrl
preflight has completed with no issues & launch control is now moving on to rehearsal to make final sure everyone knows what they have to do
Kerbal Space Agency
@KSA_MissionCtrl
lots of flashlights outside as kerbs find their spots. No sign of the astronauts anywhere, but we have a good idea where they'll turn up...
Kerbal Space Agency
@KSA_MissionCtrl
mount hookups good, pad cleared now to begin tests of all onboard systems. Rocket stands 11.1m tall mounted, weighs 1.715t (57% solid fuel)
Kerbal Space Agency
@KSA_MissionCtrl
as of right now, we do not need to reset our L-0 time, we should finish up preflight with 5min to spare & roll right into final launch prep
Kerbal Space Agency
@KSA_MissionCtrl
since we're behind schedule, you can refer to the delta times between milestones to know when we'll be moving on to the next list item
Kerbal Space Agency
@KSA_MissionCtrl
we are now moving into preflight to check rocket & ensure mounting operations connected everything & didn't damage anything in the process
Kerbal Space Agency
@KSA_MissionCtrl
Simon reports the lower booster has been secured. Drew says "are you sure?" Simon says "yes". Drew says "ARE YOU SURE??" Simon says "yes"
Kerbal Space Agency
@KSA_MissionCtrl
MSV Lymun has remained on schedule even though onshore operations are falling behind & has reported on station 3km east offshore from KSC
Kerbal Space Agency
@KSA_MissionCtrl
kerbs already staking out lawn spots for later. We have the following areas open for viewing the launch, please stay within roped areas!
Kerbal Space Agency
@KSA_MissionCtrl
launch timeline is on hold until this problem is resolved, so don't refer to it for updates until we have concluded mounting operations
Kerbal Space Agency
@KSA_MissionCtrl
Simon reports they'll need to slap together something to better secure the lower booster to the launch rail. They have time, but not much
Kerbal Space Agency
@KSA_MissionCtrl
launch team is waiting for rocket mounting to complete, running behind schedule as they are having difficulty with securing lower booster
Kerbal Space Agency
@KSA_MissionCtrl
.@BrainOfVulcan so you're saying our carry vehicle should be traveling faster? Well maybe we should let Jeb drive next time then. Wait, no
Kerbal Space Agency
@KSA_MissionCtrl
mounting operations continuing well w/rocket just getting removed from lorry now while launch ctrl team reports for their final briefing
Kerbal Space Agency
@KSA_MissionCtrl
don't forget that bit.ly/ProgenyMk3_1 will also be updating throughout that day with launch information as the we continue towards L-0
Kerbal Space Agency
@KSA_MissionCtrl
traveling at only 2m/s it takes the rocket lorry about 5.5 minutes to cover the 655m distance from the VAB to the launch pad. Now to mount!
Kerbal Space Agency
@KSA_MissionCtrl
off she goes! Even though we upgraded our rocket lorry it is still near max carry capacity with the Mk3 on board. Rear suspension be like πͺπ¬
Kerbal Space Agency
@KSA_MissionCtrl
we have reports of great weather throughout the region & have a GO for rocket rollout to the launch pad to begin mounting operations
Kerbal Space Agency
@KSA_MissionCtrl
the new launch timeline allows crews to mount during the day, gives us time to work thru any unforseen issues. Expect updates at these times
Kerbal Space Agency
@KSA_MissionCtrl
we're waiting on Wx reports to come in from around the region to help us predict if we'll have good conditions for launch later today
Kerbal Space Agency
@KSA_MissionCtrl
sun is rising for us to begin launch operations shortly and the weather is still looking great! Will get a better idea of incoming Wx soon
Kerbal Space Agency
@KSA_MissionCtrl
KSC campus is already starting to come alive as we get ready for the launch of our πππππππππ[[π]]<-10th rocket today. Double digits! Whoo!
Kerbal Space Agency
@KSA_MissionCtrl
π
Sunrise/Sunsetπ
@ KSC (UTC-4)
3/15
#2π 08:26:24 π11:46:52
#3π 14:27:15 !!π!! π17:47:43
#4π 20:28:06 π23:48:34
3/16
#1π 02:28:57 π05:49:25
@ KSC (UTC-4)
3/15
#2π 08:26:24 π11:46:52
#3π 14:27:15 !!π!! π17:47:43
#4π 20:28:06 π23:48:34
3/16
#1π 02:28:57 π05:49:25
Kerbal Space Agency
@KSA_MissionCtrl
the vessel page for bit.ly/ProgenyMk3_1 will once again provide real-time staging updates during tomorrow's launch, so tune in!
Kerbal Space Agency
@KSA_MissionCtrl
weather remains fair, no storms for several days now so keeping fingers crossed it stays that way! Launch ops begin tomorrow @ 12:45 UTC
Kerbal Space Agency
@KSA_MissionCtrl
Operations Director Drew & Head of Finances Mortimer have finished reviewing & signing all the paperwork - we are πGO FOR LAUNCHπ tomorrow!
Kerbal Space Agency
@KSA_MissionCtrl
we had a good day of recovery drills with the MSV Lymun offshore from KSC, crew is as ready as can be for the real deal tomorrow
Kerbal Space Agency
@KSA_MissionCtrl
extensive inspection of the entire Progeny Mk3 have been completed & Lead Engineer Simon reports the rocket is rdy for flight. VAB - Check!
Kerbal Space Agency
@KSA_MissionCtrl
Flight Director Lanalye is scheduled to report in 1st & she says her launch team is ready for tmrw's flight profile. Launch Control - Check!
Kerbal Space Agency
@KSA_MissionCtrl
you know that feeling before a trip or major event that you forgot something? This is basically a whole day dedicated to eradicating that
Kerbal Space Agency
@KSA_MissionCtrl
we're well into our full day of launch readiness checks in the VAB, launch control and admin building. Long list of things still to do!
Kerbal Space Agency
@KSA_MissionCtrl
everyone is hoping for bad weather tomorrow that will clear through and leave Wed looking awesome. Weather has been great since last Thurs
Kerbal Space Agency
@KSA_MissionCtrl
bit.ly/ProgenyMk3_1 payload successfully integrated to the booster stack a short time ago, we'll see a full rocket on the pad in 2 days!
Kerbal Space Agency
@KSA_MissionCtrl
we don't expect this to be a major issue, we have planned for sea recoveries with the Lymun in the past & their crew is just as capable
Kerbal Space Agency
@KSA_MissionCtrl
MSV Lymun is anchored offshore to spend tomorrow doing recovery exercises. Tongjess had to stay in port due to engine problems unfortunately
Kerbal Space Agency
@KSA_MissionCtrl
a final check of the launch pad and launch base was carried out after 3rd sunrise and Simon reports the structure & all cabling is ready
Kerbal Space Agency
@KSA_MissionCtrl
a fully-stacked Progeny Mk3 is indeed an awe-inspiring sight. Payload integration of science instruments is completing today to top it off
Kerbal Space Agency
@KSA_MissionCtrl
it's been a great week of operations picking back up, get caught up on all the details via bit.ly/OpsSummary3-6-β¦ - hooray weekend!
Kerbal Space Agency
@KSA_MissionCtrl
VAB is in high-gear to get the Progeny Mk3s ready to fly starting next week. 1st booster ready for final engine/fin tuning, 2 & 3 to follow
Kerbal Space Agency
@KSA_MissionCtrl
consensus is all went well, and we feel more confident than ever in recovering at sea. (KerBalloon casings float, rocket payloads do not)
Kerbal Space Agency
@KSA_MissionCtrl
Drew, Simon & Lanalye had a quick morning review on how the recent KerBalloon splashdown recoveries went, simulated as rocket payloads
Kerbal Space Agency
@KSA_MissionCtrl
Progeny Mk3 launch exercises will continue into next week. Flight Director Lanalye says procedure review was good - now to just drill it in!
Kerbal Space Agency
@KSA_MissionCtrl
FD Lanalye had her teams executing more Progeny Mk3 exercises after the KerBalloon mission earlier today, are now in a full procedure review
Kerbal Space Agency
@KSA_MissionCtrl
KerBalloon recovery was successful, Bob reports the chute floated well in the water long enough for it to be easy to snag & haul aboard
Kerbal Space Agency
@KSA_MissionCtrl
balloon has burst at 16.5km, the launch craft is circling around the recovery area waiting to spot the chute & get near it as it comes down
Kerbal Space Agency
@KSA_MissionCtrl
balloon ascent nominal & Bob is getting his crew in the launch craft to see how well a rocket chute floats in the seconds after splashdown
Kerbal Space Agency
@KSA_MissionCtrl
Wx still a little rough from recent storms but low-alt balloons more tolerant of launch conditions. Tongjess seen prepping to weigh anchor
Kerbal Space Agency
@KSA_MissionCtrl
maneuvering a small boat to collect the payload before it splashes down is how we'll recover Progeny Mk3 probes, this is a trial exercise
Kerbal Space Agency
@KSA_MissionCtrl
we had a complete ascent, good descent & payload is now under chute within sight of Tongjess' launch craft moving under it for recovery
Kerbal Space Agency
@KSA_MissionCtrl
we confirmed launch just over 9min ago and have picked up signal from the balloon now at 2.7km as it clears the horizon, relaying this image
Kerbal Space Agency
@KSA_MissionCtrl
one week until launch and the vessel page for bit.ly/ProgenyMk3_1 on our Flight Tracker contains all the important details on the rocket
Kerbal Space Agency
@KSA_MissionCtrl
the Progeny Mk3 launch base, standing 9.1m tall & weighing in at 1.15t, has been moved out to the launch pad, awaiting mounting next week!
Kerbal Space Agency
@KSA_MissionCtrl
it was a great half-week back at KSC, still plenty to get caught up on via bit.ly/OpsSummary2-27β¦ - have a great weekend everyone!
Kerbal Space Agency
@KSA_MissionCtrl
the current 3 flight launch schedule for the Progeny Mk3 first campaign is:
3/15 @ 18:45 UTC
3/21 @ 19:05 UTC
3/24 @ 19:20 UTC
3/15 @ 18:45 UTC
3/21 @ 19:05 UTC
3/24 @ 19:20 UTC
Kerbal Space Agency
@KSA_MissionCtrl
our three Progeny Mk3 lower boosters have arrived safe & sound! Simon says it will be 1.5wks to complete full integration of the 1st rocket
Kerbal Space Agency
@KSA_MissionCtrl
Mortimer has been working like a madman since he recovered from being one of the more seriously ill. Feb bit.ly/FinanceReport_β¦ now posted
Kerbal Space Agency
@KSA_MissionCtrl
Simon has reported that the VAB & HAB both had a good day of getting "spooled up" and ready to dive back into work tomorrow full speed ahead
Kerbal Space Agency
@KSA_MissionCtrl
Flight Director Lanalye says she's very happy to back in the actual launch facility, has been working her team on more Progeny Mk3 exercises
Kerbal Space Agency
@KSA_MissionCtrl
busy day for everyone to start getting caught up on work that was unable to be done while offsite, which wasn't as much as we feared
Kerbal Space Agency
@KSA_MissionCtrl
KSC as seen from the top of Building B in the support village on a lovely day, great to be back! Final staff/crew arriving this afternoon
Kerbal Space Agency
@KSA_MissionCtrl
today we start moving kerbs back to KSC, starting with any staff living in the support village, while DMO gets back to decontamination ops
Kerbal Space Agency
@KSA_MissionCtrl
the support village however was finished earlier this wk & we can still start moving staff back on Monday & be rdy for ops to resume 3/1
Kerbal Space Agency
@KSA_MissionCtrl
DMO says they have fallen behind schedule thanks to a major equipment malfunction. Looks like they won't have KSC cleaned up until Feb 28th
Kerbal Space Agency
@KSA_MissionCtrl
a makeshift launch control room has been setup for Flight Director Lanalye and her teams to begin launch exercises for the Progeny Mk3
Kerbal Space Agency
@KSA_MissionCtrl
KSC decontamination is proceeding on schedule according to the latest report Drew has received from the DMO. All our staff are healthy again
Kerbal Space Agency
@KSA_MissionCtrl
over half of our sick employees have made full recoveries so far, and the same is expected for the remainder over these next few days, yay!
Kerbal Space Agency
@KSA_MissionCtrl
sunset from the tunnel access to Umbarg City, along which the remainder if KSC staff will be traveling today. So long for now, KSC!
Kerbal Space Agency
@KSA_MissionCtrl
everyone is ready to begin heading out tomorrow to our temporary homes in Umbarg, where a quarantine zone has been setup for all KSC staff
Kerbal Space Agency
@KSA_MissionCtrl
good news to start off the day is that most of our staff that got sick first are finally showing improvement with continued treatment *phew*
Kerbal Space Agency
@KSA_MissionCtrl
we hope to be back at KSC again by 2/27, in the meantime KSA ops will move to Umbarg. Full report available here: bit.ly/KSCShutdown
Kerbal Space Agency
@KSA_MissionCtrl
the Disease Management Organization reports that KSC needs to be shut down & fully decontaminated. We're not happy, but health is important
Kerbal Space Agency
@KSA_MissionCtrl
we've gathered all the info we can about the health situation here in our weekly ops sitrep. Everyone feel better! bit.ly/OpsSummary2-6-β¦
Kerbal Space Agency
@KSA_MissionCtrl
our three new Progeny Mk3 lower stage boosters are ready on schedule in Sheltered Rock & are waiting for shipping to be allowed again to KSC
Kerbal Space Agency
@KSA_MissionCtrl
unfortunately while R&D labs have been cleared to operate due to their climate control, the VAB & HAB cannot be sealed & remain closed down
Kerbal Space Agency
@KSA_MissionCtrl
Day 3 of quarantine and not everyone is going stir-crazy. Flight Director Lanalye is still feeling fine & outlining tons of launch protocols
Kerbal Space Agency
@KSA_MissionCtrl
everyone is frustrated to some extent, but we also hope all our sick pull through & trust the DMO to do their job & figure this all out soon
Kerbal Space Agency
@KSA_MissionCtrl
no, we won't be announcing any further MK3 details tomorrow. Cessation of operations, even temporary, has thrown off our entire schedule
Kerbal Space Agency
@KSA_MissionCtrl
KSC remains closed & under quarantine while the DMO continues w/ its investigation. We will share any news we receive from them immediately
Kerbal Space Agency
@KSA_MissionCtrl
several of the DMO agents have fallen ill, some of whom had no prior contact to any KSC employee. They've now gone to full HAZMAT protocols
Kerbal Space Agency
@KSA_MissionCtrl
KSA/C7 operations are mostly suspended today while KSC is shut down to allow screening of all employees on campus for any disease carriers
Kerbal Space Agency
@KSA_MissionCtrl
we will comply w/ DMO officials request to shut down KSC tmrw so all employees can be screened to see if any carriers exist among unaffected
Kerbal Space Agency
@KSA_MissionCtrl
DMO agents are working through the campus, taking random surface swabs and air samples. All employees please cooperate with them as needed
Kerbal Space Agency
@KSA_MissionCtrl
officials from the Disease Management Organization have arrived - it looks like the situation has become more serious. Meeting w/Drew now
Kerbal Space Agency
@KSA_MissionCtrl
VAB is running a bit short-staffed at the moment but still has all payload bays ready, hopes to finish Mk1 booster assembly by mid-next week
Kerbal Space Agency
@KSA_MissionCtrl
we now have 1/4 of our staff out sick, including Cheranne, who was already stressing about all the papers she still has left to review
Kerbal Space Agency
@KSA_MissionCtrl
another day of integration work completed to bring us closer to launching again! We'll have Progeny Mk3 launch dates at the end of the week
Kerbal Space Agency
@KSA_MissionCtrl
with a lack of KerBalloon contracts to work on, Bill has been lending his engineering expertise to Simon and his crew working on the Mk3
Kerbal Space Agency
@KSA_MissionCtrl
there's been a rather large uptick in admissions to the MedCenter this past wk. Please follow proper hygiene protocols in public work spaces
Kerbal Space Agency
@KSA_MissionCtrl
this past week has reminded us all once again that our endeavor can be hard at times. More details in our bit.ly/OpsSummary1-30β¦
Kerbal Space Agency
@KSA_MissionCtrl
VAB is still busy as the day winds down, hoping to get one more Mk1-B booster ready before the weekend arrives. 3 left to begin next week
Kerbal Space Agency
@KSA_MissionCtrl
lots of sneezing going around lately - Simon says he has kerbs taking another look at materials used for the recent facilities repair work
Kerbal Space Agency
@KSA_MissionCtrl
Jan finance report is out. New format puts totals on top & also includes individual sheets for programs & vessels bit.ly/FinanceReport_β¦
Kerbal Space Agency
@KSA_MissionCtrl
the first of 3 Progeny Mk3 payload stages is completed, ready for science instrument integration once the rest of the rocket is assembled
Kerbal Space Agency
@KSA_MissionCtrl
Flight Director Lanalye has her team working on the launch protocols for the Progeny Mk3, will start doing launch exercises early next month
Kerbal Space Agency
@KSA_MissionCtrl
anyone else think that week just flew by? Get more details or get caught up on what went down with our Ops Summary: bit.ly/OpsSummary1-23β¦
Kerbal Space Agency
@KSA_MissionCtrl
we have some radiation data transmitted successfully & Val is already swinging back around for home, will continue to pick up rad readings
Kerbal Space Agency
@KSA_MissionCtrl
Progeny MK3 is expected to get us well into the upper atmosphere (>18km) & set stage for reaching space - Details: bit.ly/ProgenitorPR9
Kerbal Space Agency
@KSA_MissionCtrl
Progeny parts shipment has arrived this morning from USI HQ in Sheltered Rock, still need our XL boosters but can begin upper-stage assembly
Kerbal Space Agency
@KSA_MissionCtrl
HAB has swapped out the Engineering Test Bay for our new Radiation Sensor Package. Val will take it up in the Civvie tmrw for test readings
Kerbal Space Agency
@KSA_MissionCtrl
USI has confirmed booster test data was good & we've sent our order for 3 more. Progeny Mk3 rocket assembly will begin later this week
Kerbal Space Agency
@KSA_MissionCtrl
take a closer look at everything that has transpired this past wk & some of prev wk. Have a great weekend everyone! bit.ly/OpsSummary1-16β¦
Kerbal Space Agency
@KSA_MissionCtrl
initial review of the static fire data shows results in range with performance expectations, we're passing things on to USI to make sure
Kerbal Space Agency
@KSA_MissionCtrl
*koff koff* pad workers still waiting for the smoke to clear out and the booster to cool down before approaching to begin dismantling things
Kerbal Space Agency
@KSA_MissionCtrl
FWWOOOOSHHHH!!! Ignition & burn out were successful. Engineers will be reviewing data this afternoon. Check that huge exhaust tail!
Kerbal Space Agency
@KSA_MissionCtrl
5 minutes to ignition - booster is ARMED, pad is clear. Burn time will be approx 4.5s, looking for an output of 131.25kN here at sea level
Kerbal Space Agency
@KSA_MissionCtrl
15 minutes to ignition - all systems are GO & the booster will be armed soon, launch pad work crews are now clearing out to a safe distance
Kerbal Space Agency
@KSA_MissionCtrl
30 minutes to ignition - launch control has established good comms & power to the booster, checks ongoing of cameras and onboard sensors
Kerbal Space Agency
@KSA_MissionCtrl
booster has been mounted & Flight Director Lanalye has begun getting launch control ready for firing. Scheduled ignition time now 18:15 UTC
Kerbal Space Agency
@KSA_MissionCtrl
word from Simon is that the MK3 booster mounting is proceeding well, we currently expect to test fire sometime between 18:00 and 18:30 UTC
Kerbal Space Agency
@KSA_MissionCtrl
operations are now gearing up for lighting off the Mk3 lower booster, which is on its way out to the pad for mounting to the static clamps
Kerbal Space Agency
@KSA_MissionCtrl
Simon reports that VAB is on track to deliver the Progeny Mk3 booster to the launch pad for static testing this Thursday. Should be awesome!
Kerbal Space Agency
@KSA_MissionCtrl
VAB science team spent the day checking over the new radiation sensors from Bluedog Design Bureau for payload integration later this month
Kerbal Space Agency
@KSA_MissionCtrl
VAB crews are giving the Progeny Mk3 lower booster its first integration pass. Static test firing scheduled towards end of this week on 1/19
Kerbal Space Agency
@KSA_MissionCtrl
KSA is back up and operational - work done over the past half week will be assessed throughout this one to see if everything got patched up
Kerbal Space Agency
@KSA_MissionCtrl
looking forward to ops resuming tomorrow! Weather has been perfect this whole time, because of course it has. Hopefully stays so this week
Kerbal Space Agency
@KSA_MissionCtrl
KSA operations are now suspended through 1/15, will return 1/16 - however we will not be offline, will continue to respond & report events
Kerbal Space Agency
@KSA_MissionCtrl
meanwhile over in the VAB they have their hands full with organizing the integration of KerBalloon probes & the new Progeny Mk3 booster/base
Kerbal Space Agency
@KSA_MissionCtrl
Looong day for the VAB/HAB crews but everything got pulled and sorted from the warehouse to the facilities, ready to begin work tomorrow!
Kerbal Space Agency
@KSA_MissionCtrl
our supply airship arrived and has been moored outside the Support Village warehouse. Will be unloading rest of the day. New parts, yay!
Kerbal Space Agency
@KSA_MissionCtrl
not a bad first week to kick off 2017! π Get some more information on what went down this past week via bit.ly/OpsSummary1-2-β¦
Kerbal Space Agency
@KSA_MissionCtrl
storm broke up earlier than expected so VAB crews were able to complete setup of the clamps for testing our new booster later this month
Kerbal Space Agency
@KSA_MissionCtrl
contractor says this is the earliest they can get the work done. Wish it could have been over Dec break but that's a holiday for *everyone*
Kerbal Space Agency
@KSA_MissionCtrl
KSA ops will be suspended from 1/11-1/16 while various work on our facilities is undertaken to repair some more building issues we've found
Kerbal Space Agency
@KSA_MissionCtrl
bad news from Kravass where a storm is sweeping thru, all airships grounded, no parts delivery today. Looks to be heading towards us next
Kerbal Space Agency
@KSA_MissionCtrl
Lead Scientist Cheranne has reminded us that a separate delivery coming in two weeks will bring to us our new radiation sensors from BDB!
Kerbal Space Agency
@KSA_MissionCtrl
VAB & HAB gearing up for a big parts delivery later this wk that will let them start on Progeny Mk3, KerBallon & Civvie production projects
Kerbal Space Agency
@KSA_MissionCtrl
we will be returning to the main launch site this year for flights of the Progeny Mk3, which we'll have more info on throughout this month
Kerbal Space Agency
@KSA_MissionCtrl
everyone has been spending all day getting back up to speed from where they left off at the end of Dec, rdy to hit ground running tomorrow!
Kerbal Space Agency
@KSA_MissionCtrl
we're back! KSA gradually returning to full operations this week. We expect this to be an exciting calendar year & a full one at that!
Kerbal Space Agency
@KSA_MissionCtrl
that's it! We're out! Everyone enjoy the holiday, see you next year! Before you go though, here's a 2017 preview: bit.ly/OpsSummary12-1β¦
Kerbal Space Agency
@KSA_MissionCtrl
VAB reports the Z-60 batteries have undergone their full test regimen and are cleared for use on rocket/balloon probes starting next year
Kerbal Space Agency
@KSA_MissionCtrl
a big thank you to the Maritime Service for their support today. We look forward to extending our partnership in 2017 with rocket recoveries
Kerbal Space Agency
@KSA_MissionCtrl
Cheranne says the radiation instrument from Bluedog Design Bureau is in its final stages of testing, looking for delivery next month
Kerbal Space Agency
@KSA_MissionCtrl
our next altitude milestone is 10km and Simon reports his Progenitor team has already been working on the Progeny Mk3, TBA at start of 2017
Kerbal Space Agency
@KSA_MissionCtrl
these will be for our high-alt KerBalloon probes & also for the next iteration of the Progeny rockets (not the current Mk2.1s already built)
Kerbal Space Agency
@KSA_MissionCtrl
new batteries have arrived, carrying 60 units of electric charge (20 more than two of our prev batts together) and only weighing 0.002t more
Kerbal Space Agency
@KSA_MissionCtrl
luckily we managed to pull Drew away from his desk just in time for him to enjoy... he's already reviewing Progeny Mk3 initial designs π twitter.com/DKerman_KSA/stβ¦
Kerbal Space Agency
@KSA_MissionCtrl
Wernher has announced we've awarded a contract to Bluedog Design Bureau, who will be working with us to build our new radiation sensor
